A Southern Cross pump with a whole new life - Delivered to Bendigo in Victoria.
No longer a 2.5" x 3" but a higher capacity 5" x 5" pump with a new liner, piston plates, centre plate and kit.
This pump is testimony to the "smarts" of our previous generations. Southern Cross designers were sufficiently switched-on operators to use the one gearbox to power a number of different pumps - fewer "spares" needed to be produced and kept on hand and mix-and-match at your leisure & this pump is hard evidence of that flexibility.
This pump came to us as a 2.5" x 5" pump with a cracked wet end that was beyond repair.
We had a "spare" 5" x 5" wet end that we just bolted on, that easy.
This pump has been fitted with:
- New parts:
- Piston Plates
- Centre plate
- Standard new Wet-End Kit (Buckets, Valves, Springs, Gaskets & Packing)
Though it is not shown, the gearbox is in very sound condition.
Suction and discharge on this pump are both 2.5".
Our information says that they have:
- A head of 250 feet
- At 50 strokes per minute (250 rpm at the pump) they will deliver 2100 gallons per hour.
- Only need a 4 hp electric motor to drive them to the maximum head unless you need to speed up the pump (which is not highly recommended).
Enquire about this Pump
If you have any questions about this pump or would like pricing please contact us here.